Item Tag: unbranded

simatic s5 sdecoper 6.2 u13

simatic s5 sdecoper 6.2 u13 We gladly ship Worldwide*Scroll down for more Photos and details in good physical condition, untested. Don’t forget to place your bid.More photos down below By bidding on this auction you agree to the following terms: Shipping Terms:Buyer pays all shipping costs.Let us know if there is an issue with the shipping costs, as they are automatically calculated by ebay.Shipments made to California must include 7.75% sales tax unless we are provided with a valid resale certificate.We reserve the right to ship with Fedex , USPS, UPS and any other carrier in the best interests of both the buyer and seller.If the shipping cost quoted is over $150, that means it will be shipped freight, and the price quoted is for pickup at a freight terminal nearby your location (usually within 25 mi if you are in a major metro US city). if you need residential delivery, or if you don’t have a forklift/loading dock the price will be higher in some cases.Payment Terms:Payment is to be made by PayPal, propay or credit card.Please send us an ebay message if you have any questions.Payment is to be received within ten days of close of auction.Should payment not be received within ten days the item will be re-listed and high bidder will forfeit.International Terms: (These terms only apply to international shipments.)Buyer is responsible for all brokerage, customs, and or duty charges.*Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund.Payment must be made in US Dollars. Warranty Terms:Returns are available up to 14-days from receipt.What you see in the picture(s) is what you get nothing more nothing less.Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as “Untested” are simply that we have been unable to fully test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions.We guarantee that you will receive the make and model listed in the ad.The maximum liability of Best Stuff To You is the high bid +shipping cost of the auction listing.Return Terms:Returns are allowed and must be filed within 14 days of receipt of shipment. Item should be returned in the original box and packaging .Bidder must request a RMA number and return address before returning item(s). All new/sealed toner cartridges are sold as-is with No returns unless returned unopened.As a company policy, we do not cancel transactions through ebay.send an ebay message if you have any questions.We wont leave you stuck without a solutionMedical Device Terms: The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that eBay deems these terms are applicable to:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you should not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.The buyer will not hold the seller, eBay or the item’s manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device.Please note before bidding that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into serviceDaniel Rydell, SanDiego, CA, USAebay name: bigonbusinesssend an ebay message if you need more information Item Condition Terms: On these listings, our company’s condition “used” does NOT necessarily mean “fully operational and functions as intended”. If fact it may have unknown flaws and deficiencies. the item has only been tested to the extent described in the item condition/testing notes. Additional testing may be performed upon request of the buyer before shipment to ensure a satisfactory transaction for both parties. If any provision of this Auction Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect. Copyright 2022 bigonbusiness – All Rights Reserved.

Modicon Memory Card 8K AS-MEEP-001 EEprom Schneider Gould AEG

Modicon Memory Card 8K AS-MEEP-001 EEprom Schneider Gould AEG We gladly ship Worldwide*Scroll down for more Photos and details In very good condition. Don’t forget to place your bid.More photos down below By bidding on this auction you agree to the following terms: Shipping Terms:Buyer pays all shipping costs.Let us know if there is an issue with the shipping costs, as they are automatically calculated by ebay.Shipments made to California must include 7.75% sales tax unless we are provided with a valid resale certificate.We reserve the right to ship with Fedex , USPS, UPS and any other carrier in the best interests of both the buyer and seller.If the shipping cost quoted is over $150, that means it will be shipped freight, and the price quoted is for pickup at a freight terminal nearby your location (usually within 25 mi if you are in a major metro US city). if you need residential delivery, or if you don’t have a forklift/loading dock the price will be higher in some cases.Payment Terms:Payment is to be made by PayPal, propay or credit card.Please send us an ebay message if you have any questions.Payment is to be received within ten days of close of auction.Should payment not be received within ten days the item will be re-listed and high bidder will forfeit.International Terms: (These terms only apply to international shipments.)Buyer is responsible for all brokerage, customs, and or duty charges.*Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund.Payment must be made in US Dollars. Warranty Terms:Returns are available up to 14-days from receipt.What you see in the picture(s) is what you get nothing more nothing less.Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as “Untested” are simply that we have been unable to fully test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions.We guarantee that you will receive the make and model listed in the ad.The maximum liability of Best Stuff To You is the high bid +shipping cost of the auction listing.Return Terms:Returns are allowed and must be filed within 14 days of receipt of shipment. Item should be returned in the original box and packaging .Bidder must request a RMA number and return address before returning item(s). All new/sealed toner cartridges are sold as-is with No returns unless returned unopened.As a company policy, we do not cancel transactions through ebay.send an ebay message if you have any questions.We wont leave you stuck without a solutionMedical Device Terms: The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that eBay deems these terms are applicable to:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you should not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.The buyer will not hold the seller, eBay or the item’s manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device.Please note before bidding that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into serviceDaniel Rydell, SanDiego, CA, USAebay name: bizbonanzasend an ebay message if you need more information Item Condition Terms: On these listings, our company’s condition “used” does NOT necessarily mean “fully operational and functions as intended”. If fact it may have unknown flaws and deficiencies. the item has only been tested to the extent described in the item condition/testing notes. Additional testing may be performed upon request of the buyer before shipment to ensure a satisfactory transaction for both parties. If any provision of this Auction Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect. Copyright 2022 bizbonanza – All Rights Reserved.

PLC Trainer Interface – Digital Inputs, Digital Outputs, Analog Inputs and PWM

Thanks for Viewing This Auction. For sale is for ONE: Custom – “PLC Trainer Interface” with the following features: Mounted in a protective plastic enclosure.8 of: 24 VDC – High Active – PLC compliant – Outputs – with LED status indicator (column of manual switches (latching) on left side).Connect these to your PLCs Digital Inputs.8 of: 24 VDC – High Active – PLC compliant – Inputs – with LED indicators (row of LEDs at bottom).Also has Red, Yellow and Green LEDs for use as Traffic Light Programing training.Red “Switch Bank” can disable these LEDs Connect these to your PLCs Digital Outputs.2 of: Analog Outputs – 0 to 10 VDC – manually adjustable with some user selectable output patterns.Connect these to your PLC’s Analog Inputs (these are located at upper left side).1 of: PWM Input – 0 to 10 VDC PWM – Used to drive the analog 0- 10 VDC panel meter.Connect this to your PLC’s PWM output (this is located at upper left side).CAUTION: NOT all PLCs have PWM output capability.Additionally, PWM to DC conversion is “something”, but is is not “all that”.Don’t believe the YouTube videos on this subject matter – these are geared to hobbyists – not mission critical industrial applications. Don’t expect rail to rail capability.Don’t expect rail to rail linearity.Don’t expect repeatable performance.Don’t expect performance longevity.This Trainer Interface has a 24 VDC input, with a 3 amp fuse protecting your circuits, and with an ON / OFF switch.. You can then choose to also power your PLC from the 24 VDC output (top left hand corner)You MUST provide a 24 VDC – 3 Amp minimum Power Supply, and a PLC of your choice. Please be aware that this trainer interface is designed to connect to PLCs with DC outputs (example: Siemens S7-1212C DC/DC/DC / Beckhoff EL 2002 / EL1008, and so many others. ). If you contact me I would be more than happy to work with you to determine if your current PLC / prospective PLC can be interfaced with this trainer. Now, if you have a “relay output” type of PLC, with a small amount of customization it can be interfaced to this trainer. This type of work is not out of the usual scope of required work when installing and deploying PLC systems into industrial environments. == == == NO Software is included in this sale. You MUST provide a 24 VDC – 3 Amp minimum Power Supply, and a PLC of your choice. FYI – I also attached an image of a Beckhoff TwinCAT “WebVisu” screen capture of this “PLC Trainer Interface” connected to a Siemens S7-1212 (8 DI, 4 DO, 1 PWM and 2 AI), where the Siemens PLC is publishing its I/O variables to the Beckhoff TwinCat system via OPCUA. The Beckhoff TwinCAT then uses those variables and displays them online through the WebVisu. To accomplish this, I needed to program both the Siemens S7-1212, the Beckhoff TwinCAT, and enable OPCUA in both systems so that they could communicate with each other over Ethernet. Just an example of what you can work to do as well using your own PLC. == == == Make your Best Offer, Get a GREAT deal. 5 Identical items are available at the start of this auction. == == == Sale price includes FREE shipping to U.S.A. locations. This item ships fast from the U.S.A. using USPS or UPS (my choice which one) – no hassles / no long waits. This items has been pre-packaged, and is re ready to ship TODAY. Staging location: 1A77 == == == Please always closely review the images that I attach to the auction to see exactly what you are buying. I do try my best to describe the items as they are, and provide as much details as I have about each. == == == Thanks for your interest in my auction – I appreciate it == == == RightFitSales – Shop with Confidence USA Seller. Shipping is Fast and Free.

StarCAM Nesting Programming Nesting Software F/ CNC Flame Plasma Cutting Machine

Description StarCAM Nesting Programming Nesting Software CNC Flame Plasma Cutting Machine Software Download Software Installation File: http://www.starfcnc.com/Upload/StarCAM%20V4.7%20Setup.exe Description: It consists of drawing module (StarCAM), nesting module (StarCUT), and numerical control code simulation module (StarTEST). Each module can run independently or call each other. It supports CNC programming of various CNC cutting control machines. The drawing module can complete the graphics drawing, editing, scaling, copying, arraying, rotation and other operations of cutting parts; support the import, edit and export operations of CAD graphics files in other formats (such as CAM, DXF, DWG and IGES), and support user library management; and can optimize CAD graphics. The machining codes required for cutting paths and CNC machining can be generated for parts. The nesting module can complete the batch nesting of multiple parts on a rectangular plate or a remaining material plate, support short-line connection, co-edge and bridge technology, reduce the number of perforations and improve the utilization rate of the plate. It has high speed and high efficiency, and supports manual nesting, matrix nesting, interactive nesting and residual nesting, and can quickly generate the CNC codes required by a variety of CNC cutting equipment. The simulation module can perform computer graphics simulation on the NC codes generated by the above two modules, and can run single-step and step-by-step tracking. It supports the editing and modification of NC codes during the simulation process, verifies the correctness and rationality of NC codes, and improves production efficiency. And the processing cost can be estimated. Features: – Automatic position collecting: In line with traditional drawing software, the control point acquisition function (midpoint, end point, quadrant point, intersection point, entity point, etc.) is added, which improves the operability of the software, drawing speed and interactivity – Window ruler display: The added window ruler can directly reflect the size of parts and the size of sheets. The ruler can change dynamically with the zoom of the part, and users can intuitively see the size and coordinate position of the part – Special display when entity is selected: Improve user recognizability. And added the outline zoom direction indication, which is convenient for users to choose – Sharp corner transition processing after tool path compensation: to prevent contour line breakage, distortion and other problems that occur after tool path compensation in part graphics – Support the import and editing of other graphic file formats: import, export and edit graphic format files such as for AUTOCAD and FASTCAM – Intelligent trimming function: can quickly complete the trimming and deletion of graphic line segments and arcs. Simple and practical to use – User gallery management. Users can add common parts classification to the user graphics library for later nesting use – Automatic path setting: Using this function, the processing path, lead-in and lead-out lines of parts can be quickly generated, and the positions of lead-in and lead-out lines can be dynamically modified to reduce part interference and improve sheet utilization. Support compensation line display function, allowing users to see the compensation amount intuitively – CAD clearing and CAD compression: CAD clearing function is used to clear redundant line segments and duplicate entities in CAD drawings. The CAD compression function can compress a large number of small line segments in the graphics file, reducing the number of entities and improving cutting efficiency – The short-line continuous cutting function is added to the nesting module. When the lead-in and lead-out lines of each part are close to each other, the lead-out line of the previous part is directly and continuously cut to the lead-in line of the next part, without re-perforating, reducing the number of perforations – The nesting module has added the function of full co-edge nesting. For a large number of parts with straight contours, the nesting is directly carried out according to the width of the slit, and only one cut is made at the common edge, which greatly reduces the number of perforations and cutting length – The line drawing bridge function is added to the nesting module, and the bridge lines are used to connect the outlines of multiple parts into one outline, which reduces the number of perforations and effectively prolongs the life of cutting torque – Generating residual material sheet and residual material nesting. The residual material plate file can be automatically generated for the processing residual material, so that users can insert the residual material plate for nesting in the subsequent cutting – A control file modification tool has been added, and users can edit the NC code according to the code format of the control system used – For Win10, Win8, Win7, XP; 32-bit, 64-bit operating systems – STARCAM software is suitable for cutting of STARCAM system, STARCAM system, Fangling system, Hypertherm system, etc. The software can automatically typesetting, common edge cutting, and the size of steel plate is not limited and can be set arbitrarily – Fit portable, small bee cutting machines, desktop and gantry cutting machines Package Included: – 1 x Set of Nesting Software Note: – It can be switched between Chinese and English. – Two packing are available. Because the functions of these two kinds are the same, items in different packing will be delivered at random. Thank you for your understanding! Payment Terms 1.We accept PayPal only. 2.All major credit cards are accepted through secure payment processor PayPal. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms – For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding. Return Terms 1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund. 2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA. 3. We reserve the right to refuse any returns for objective reasons. Custom Duties & Taxes 1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer’s responsibility. 2. Avoiding some unnecessary trouble, please check with your country’s customs office to inform us what we should declare its value before shipping. Feedback 1. If you are dissatisfied for any reason, please don’t be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. 2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.

StarCAM Nesting Programming Software CNC Flame Plasma Cutting Machine Software

Description StarCAM Nesting Programming Nesting Software CNC Flame Plasma Cutting Machine Software Download Software Installation File: http://www.starfcnc.com/Upload/StarCAM%20V4.7%20Setup.exe Description: It consists of drawing module (StarCAM), nesting module (StarCUT), and numerical control code simulation module (StarTEST). Each module can run independently or call each other. It supports CNC programming of various CNC cutting control machines. The drawing module can complete the graphics drawing, editing, scaling, copying, arraying, rotation and other operations of cutting parts; support the import, edit and export operations of CAD graphics files in other formats (such as CAM, DXF, DWG and IGES), and support user library management; and can optimize CAD graphics. The machining codes required for cutting paths and CNC machining can be generated for parts. The nesting module can complete the batch nesting of multiple parts on a rectangular plate or a remaining material plate, support short-line connection, co-edge and bridge technology, reduce the number of perforations and improve the utilization rate of the plate. It has high speed and high efficiency, and supports manual nesting, matrix nesting, interactive nesting and residual nesting, and can quickly generate the CNC codes required by a variety of CNC cutting equipment. The simulation module can perform computer graphics simulation on the NC codes generated by the above two modules, and can run single-step and step-by-step tracking. It supports the editing and modification of NC codes during the simulation process, verifies the correctness and rationality of NC codes, and improves production efficiency. And the processing cost can be estimated. Features: – Automatic position collecting: In line with traditional drawing software, the control point acquisition function (midpoint, end point, quadrant point, intersection point, entity point, etc.) is added, which improves the operability of the software, drawing speed and interactivity – Window ruler display: The added window ruler can directly reflect the size of parts and the size of sheets. The ruler can change dynamically with the zoom of the part, and users can intuitively see the size and coordinate position of the part – Special display when entity is selected: Improve user recognizability. And added the outline zoom direction indication, which is convenient for users to choose – Sharp corner transition processing after tool path compensation: to prevent contour line breakage, distortion and other problems that occur after tool path compensation in part graphics – Support the import and editing of other graphic file formats: import, export and edit graphic format files such as for AUTOCAD and FASTCAM – Intelligent trimming function: can quickly complete the trimming and deletion of graphic line segments and arcs. Simple and practical to use – User gallery management. Users can add common parts classification to the user graphics library for later nesting use – Automatic path setting: Using this function, the processing path, lead-in and lead-out lines of parts can be quickly generated, and the positions of lead-in and lead-out lines can be dynamically modified to reduce part interference and improve sheet utilization. Support compensation line display function, allowing users to see the compensation amount intuitively – CAD clearing and CAD compression: CAD clearing function is used to clear redundant line segments and duplicate entities in CAD drawings. The CAD compression function can compress a large number of small line segments in the graphics file, reducing the number of entities and improving cutting efficiency – The short-line continuous cutting function is added to the nesting module. When the lead-in and lead-out lines of each part are close to each other, the lead-out line of the previous part is directly and continuously cut to the lead-in line of the next part, without re-perforating, reducing the number of perforations – The nesting module has added the function of full co-edge nesting. For a large number of parts with straight contours, the nesting is directly carried out according to the width of the slit, and only one cut is made at the common edge, which greatly reduces the number of perforations and cutting length – The line drawing bridge function is added to the nesting module, and the bridge lines are used to connect the outlines of multiple parts into one outline, which reduces the number of perforations and effectively prolongs the life of cutting torque – Generating residual material sheet and residual material nesting. The residual material plate file can be automatically generated for the processing residual material, so that users can insert the residual material plate for nesting in the subsequent cutting – A control file modification tool has been added, and users can edit the NC code according to the code format of the control system used – For Win10, Win8, Win7, XP; 32-bit, 64-bit operating systems – STARCAM software is suitable for cutting of STARCAM system, STARCAM system, Fangling system, Hypertherm system, etc. The software can automatically typesetting, common edge cutting, and the size of steel plate is not limited and can be set arbitrarily – Fit portable, small bee cutting machines, desktop and gantry cutting machines Package Included: – 1 x Set of Nesting Software Note: – It can be switched between Chinese and English. – Two packing are available. Because the functions of these two kinds are the same, items in different packing will be delivered at random. Thank you for your understanding! Payment Terms 1.We accept PayPal only. 2.All major credit cards are accepted through secure payment processor PayPal. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms – For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding. Return Terms 1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund. 2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA. 3. We reserve the right to refuse any returns for objective reasons. Custom Duties & Taxes 1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer’s responsibility. 2. Avoiding some unnecessary trouble, please check with your country’s customs office to inform us what we should declare its value before shipping. Feedback 1. If you are dissatisfied for any reason, please don’t be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. 2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap. On Jul 12, 2023 at 00:53:28 PDT, seller added the following information: